FR24 feed from Windows

Are you having trouble getting Virtual Radar Server installed and running? If so then this is the place to ask about it.
Post Reply
Rooster
Posts: 2
Joined: Sat Apr 09, 2016 3:16 pm

FR24 feed from Windows

Post by Rooster » Sat Apr 09, 2016 3:20 pm

Hello,
I have used virtual radar on an older FR24 feeder software... but since upgrading to the new FR24 software I cannot get Virtual Radar to connect to it !!!!

I downloaded the latest VR and tried the wizard... to no avail :-(

Any pointers please ?

Thanks

Rooster
Posts: 2
Joined: Sat Apr 09, 2016 3:16 pm

Re: FR24 feed from Windows

Post by Rooster » Wed May 04, 2016 4:42 pm

Tried every setting I think... still wont connect :twisted:

FR24 software connects to my TV dongle and works 1st time everytime.... why wont VRS work ?

PLEASE a little help.

agw
Posts: 2241
Joined: Fri Feb 17, 2012 3:20 am

Re: FR24 feed from Windows

Post by agw » Sat May 07, 2016 10:24 pm

I have no idea, I didn't write the FR24 feed software. What settings are you using? Have you tried FR24's forums?

dedicados
Posts: 3
Joined: Fri Jun 03, 2016 3:54 pm

Re: FR24 feed from Windows

Post by dedicados » Fri Jun 03, 2016 4:17 pm

hey i'm new here.

have you tried all the ports, also change the option to RAW, or others, that happen to me, when i was feeding FR24 and FlightAware from a RaspberryPi.

i had to test all options and check which one was the best.

egpd1701
Posts: 49
Joined: Fri Nov 08, 2013 3:39 pm

Re: FR24 feed from Windows

Post by egpd1701 » Thu Jun 09, 2016 9:23 am

I would run it from a dump1090 feed (you get better results that way)

Post Reply