Help with remote feed using modesmixer2

Are you having trouble getting Virtual Radar Server installed and running? If so then this is the place to ask about it.
Post Reply
ktul_adsb
Posts: 3
Joined: Thu Sep 28, 2017 1:06 pm

Help with remote feed using modesmixer2

Post by ktul_adsb » Thu Sep 28, 2017 4:13 pm

Hello all,

I have VRS up and running headless on a Debian virtual private server. I have a Pi3 already setup and feeding FA, ADSBexchange, etc. and would like to feed data to my new VRS as well (without running an instance of VRS on the Pi). From what I gather, this is possible using Modesdeco2 and/or Modesmixer2, which I do have installed on the Pi.

Could someone help me out getting this going?

Thanks!

Skibox
Posts: 144
Joined: Mon Apr 07, 2014 7:06 pm
Location: ESGG

Re: Help with remote feed using modesmixer2

Post by Skibox » Fri Sep 29, 2017 1:08 am

Configure a "push" receiver in VRS, with AVR/Raw data format.

Then set up modeSmixer2 on the Rpi.

modesmixer2 --inConnect localhost:30005 --outConnect beast:aaa.bbb.ccc.ddd:xxxx

where abcd is your VRS machines public IP and xxx the port you selected.

/M

ktul_adsb
Posts: 3
Joined: Thu Sep 28, 2017 1:06 pm

Re: Help with remote feed using modesmixer2

Post by ktul_adsb » Fri Sep 29, 2017 12:35 pm

Thanks, that did it! Up and running :)

Post Reply