Page 1 of 1

External IP not working

Posted: Mon Feb 04, 2019 12:55 pm
by Dodsy
Hi all, I have recently got VRS set up to show all my data from my PI feed and all is fine on that front that

The issue I'm having is the external IP won't load

I have Flightaware set up and that is an 86. address with a port of 8080 that loads fine

VRS gives me an external address which is exactly the same as Flightaware, so I altered the IP and chose 8085

I made a file named InstallerConfiguration.xml and put the following in

<?xml version="1.0" encoding="utf-8" ?>
<InstallerSettings xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<WebServerPort>8085</WebServerPort>
</InstallerSettings>

And opened the port within my hub upon trying to connect it won't load

Image

Now the same link with flightaware on the 8080 port

Image

Is it the fact I have flightaware running which is causing a conflict between the 2 and as that was set up 1st that's the only external one which will load?