ADSB-Out equipped UAVs not displaying

Is Virtual Radar Server not behaving itself? If so then please report it here.
Post Reply
Squadgy
Posts: 13
Joined: Sat Sep 01, 2018 7:45 pm

ADSB-Out equipped UAVs not displaying

Post by Squadgy » Sun Feb 10, 2019 2:28 pm

Hello

Is there any restriction in VRS in displaying ADSB-Out equipped UAVs ?

I am running a Uavionix PingStation and have an 1090mhz ADSB-Out equipped UAV. This UAV has the 'Emitter Type' set as 'UAV', and therefore sends the 'Emitter Type as "13", as defined in this document : https://www.eurocontrol.int/sites/defau ... 10.pdf.pdf (See Page 12)

With the Emitter Type set to 'UAV' it does not display on VRS.

If the Emitter Type on the UAV is changed to 'Light Aircraft' (Emitter Type "1") it shows immediately on VRS

I know that the Uavionix PingStation can 'see' the UAV no matter what Emitter type is selected on UAV as I can see it in the logs, and therefore VRS must be filtering - I can't find a filter for Emitter Type however.

Does anyone have any ideas ?

Squadgy
Posts: 13
Joined: Sat Sep 01, 2018 7:45 pm

Re: ADSB-Out equipped UAVs not displaying

Post by Squadgy » Mon Feb 18, 2019 3:07 pm

Please disregard this query - Inidentified the issue was with a setting in the Drone’s ADSB device.

Post Reply