Page 1 of 1

ADSB-Out equipped UAVs not displaying

Posted: Sun Feb 10, 2019 2:28 pm
by Squadgy
Hello

Is there any restriction in VRS in displaying ADSB-Out equipped UAVs ?

I am running a Uavionix PingStation and have an 1090mhz ADSB-Out equipped UAV. This UAV has the 'Emitter Type' set as 'UAV', and therefore sends the 'Emitter Type as "13", as defined in this document : https://www.eurocontrol.int/sites/defau ... 10.pdf.pdf (See Page 12)

With the Emitter Type set to 'UAV' it does not display on VRS.

If the Emitter Type on the UAV is changed to 'Light Aircraft' (Emitter Type "1") it shows immediately on VRS

I know that the Uavionix PingStation can 'see' the UAV no matter what Emitter type is selected on UAV as I can see it in the logs, and therefore VRS must be filtering - I can't find a filter for Emitter Type however.

Does anyone have any ideas ?

Re: ADSB-Out equipped UAVs not displaying

Posted: Mon Feb 18, 2019 3:07 pm
by Squadgy
Please disregard this query - Inidentified the issue was with a setting in the Drone’s ADSB device.