Weird lines on map

Is Virtual Radar Server not behaving itself? If so then please report it here.
Post Reply
bh1
Posts: 2
Joined: Sat May 17, 2014 9:59 pm

Weird lines on map

Post by bh1 » Sat May 17, 2014 10:08 pm

Image

Hi all. So I'm pretty new to all of this Mode-S stuff and VRS and all that. I've got it up and running but these weird line appear on my map when tracking an aircraft, as shown above. When I refresh they are still there, and appear when I get position data from an aircraft. How can I get rid of them? Sorry if wrong forum, but I think it's a bug. Maybe not. They just won't go away.

Cix
Posts: 24
Joined: Mon Mar 03, 2014 3:51 pm
Location: Nederland

Re: Weird lines on map

Post by Cix » Sun May 18, 2014 9:51 am

These are reciever ranges, the lines indicates a path of a airplane that you've tracked, so can you see what area you are covering. See my image for my reciever range, which is a bit larger, and gives a more clear view of how this is intended.

You can reset the lines by going to VRS -> Tools | Reset reciever range plot followed by chosing your reciever.

If you prefer not to see the reciever range lines, you can also disable them you can do this by going to the Menu (Your VRS Radar site) -> Reciever Range | YourReciever | Remove All

Image

bh1
Posts: 2
Joined: Sat May 17, 2014 9:59 pm

Re: Weird lines on map

Post by bh1 » Sun May 18, 2014 4:15 pm

Wow. I feel pretty dumb now. Thanks for the helpful reply though!

Post Reply