No Range Plot

Bug reports and questions about running Virtual Radar Server on Linux
Post Reply
MK2wx
Posts: 28
Joined: Sun Jul 16, 2017 10:01 pm

No Range Plot

Post by MK2wx » Fri Oct 25, 2019 6:28 pm

Hello folks,

Today I installed the latest version on a Raspberry Pi. (VRS 2.4.3) I also have the old version running on another PI.

I am not seeing the receiver range plot on the new install. As far as I can tell I've set up everything identically.

Running on a Raspberry Pi 3 B plus, and that wit the latest buster (2019-09-26-raspbian-buster)

The range plot is the only bit that seems not to work.

Any ideas of what I might try to debug this? :?

Ask away if you need any further info.

Hope it can be fixed.
Cheers,
Ian

MK2wx
Posts: 28
Joined: Sun Jul 16, 2017 10:01 pm

Re: No Range Plot

Post by MK2wx » Fri Oct 25, 2019 6:55 pm

UPDATE:

Just noticed this in the window that ran VRS

Code: Select all

libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: cHRM chunk does not match sRGB
Can they be connected or is it another problem? <shrug>
Cheers,
Ian

MK2wx
Posts: 28
Joined: Sun Jul 16, 2017 10:01 pm

Re: No Range Plot

Post by MK2wx » Fri Oct 25, 2019 8:26 pm

Further discovery:

I don't have an entry "Menu|Receiver Range" either.

I've told the config that web users can view the plot, but it does not show. I'm guessing that if I can't see that menu item, then it might be part of the problem. <shrug>
Cheers,
Ian

MK2wx
Posts: 28
Joined: Sun Jul 16, 2017 10:01 pm

Re: No Range Plot

Post by MK2wx » Fri Oct 25, 2019 8:28 pm

OK, solved it, thanks for all the help! LOL ;o)
Cheers,
Ian

Post Reply