Config file not used when started via script

Bug reports and questions about running Virtual Radar Server on Linux
Post Reply
Tom
Posts: 12
Joined: Mon Jun 04, 2018 7:45 pm

Config file not used when started via script

Post by Tom »

Hi,

When starting VRS on a RaspberryPi 4 via command line everything is fine. When using the same command in a script (to autostart upon boot) VRS starts but not using any settings from the config file. Any ideas?

Thanks
Tom
trapper_dave
Posts: 1
Joined: Wed Apr 22, 2020 8:06 am

Re: Config file not used when started via script

Post by trapper_dave »

I'm also having this problem. I even bought a new Pi and tried a reinstall and I'm facing exactly the same issue.

I am very keen to get it resolved. The one thing that I've tried differently this time is following this guide (https://steamforge.net/wiki/index.php/H ... ar_on_Boot) provided by begleysm on this forum.
Raffles
Posts: 28
Joined: Thu Nov 16, 2017 3:34 pm

Re: Config file not used when started via script

Post by Raffles »

what happens if you start vrs manually?

may be a script problem, not a vrs one???
Post Reply