Page 1 of 1

Feed to VRS

Posted: Thu Feb 22, 2018 5:43 am
by kiwikieran
Hi all, is there a way to feed from VRS to another VRS? Or feed from DUMP1090 to VRS?
I am setting up a remote Pi Receiver and need away to feed to the VRS server at home. I have tried to port forward but no luck.
Any suggestions please.
Thanks, in advanced.

Re: Feed to VRS

Posted: Thu Feb 22, 2018 8:31 am
by Datamix
Easiest way to connect Dump1090 is to use the Wizard in the receiver options: http://www.virtualradarserver.co.uk/Doc ... tions.aspx

And here how to rebroadcast your VRS: http://www.virtualradarserver.co.uk/Doc ... tions.aspx

After you set up the rebroadcast options you can reach it in your second VRS instance.

Re: Feed to VRS

Posted: Sat Feb 24, 2018 5:44 pm
by Skibox
The remote receivers should be TCP clients and feed into your VRS. Dump doesn't support that, but install ModeSmixer2 or make your own with nc back-to-back, pull the data from 30005 and send to your VRS external IP.

Open a suitable port-forward at the VRS server location.

Set up a "push" receiver in VRS.

Done. Now just add more receivers with the same principle.

/M

Re: Feed to VRS

Posted: Sat Feb 24, 2018 7:28 pm
by kiwikieran
Thanks every one for the help, Very much appreciated.