Page 1 of 1

FR24 Linux client and VRS on W10

Posted: Thu May 30, 2019 5:02 pm
by Capecod2
Hello feeder friends,

Since the FR24 windows client stopped, I've been looking for a way to continue to feed FR24 but without redoing my entire installation under w10 which works perfectly for several years.
I also have a raspberry P1 that I don't use.
Question: Is it possible to install the FR24 Linux client on the Raspberry, and feed the data from my VRS under W10 to the Raspberry and the FR24 client under Linux via an Ethernet cable? (my Rasperry P1 doesn't have Wifi) and my PC is connected to my internet box in wifi.

Thank you for your insights :idea: :D

Capecod

Translated with www.DeepL.com/Translator

Re: FR24 Linux client and VRS on W10

Posted: Fri May 31, 2019 4:15 pm
by Capecod2
Hello,

I am progressing....
The FR24 client is now installed on the Pi.
The Pi is in wifi, the PC on which VRS is installed is also in wifi.
During the installation of the FR24 client I gave the requested information (email address, lat/long of the receiver etc...)
On the FR24 website my receiver is well "online" but 0 planes.....
by connecting from a PC to the FR24 client via http://ip-du-pi:8754 I can modify the options but I can't get an aircraft.........
The pi is in fixed IP 192.168.0.11
The PC is in fixed IP 192.168.0.10
The dongle is DVB-T with RTL1090 on the PC of course, with more or less 100/130 aircraft's tracked

Any idea of wich option i should activate ?

Image

Regards,
Capecod

Translated with www.DeepL.com/Translator

Re: FR24 Linux client and VRS on W10

Posted: Sat Jun 01, 2019 3:34 pm
by Capecod2
Well, that's it, problem solved.

Image

Regards,
Capecod