Is Virtual Radar Server not behaving itself? If so then please report it here.
-
Chriso
- Posts: 46
- Joined: Sat Oct 13, 2012 9:46 pm
-
Contact:
Post
by Chriso » Sun Feb 12, 2017 11:33 am
Hi
Very often stops VRS and the error pops up:
Code: Select all
Podpis problemu:
Nazwa zdarzenia problemu: CLR20r3
Podpis problemu: 01: VirtualRadar.exe
Podpis problemu: 02: 2.4.0.0
Podpis problemu: 03: 581e3ac7
Podpis problemu: 04: mscorlib
Podpis problemu: 05: 4.6.1590.0
Podpis problemu: 06: 5787ed44
Podpis problemu: 07: 392a
Podpis problemu: 08: 18
Podpis problemu: 09: System.Threading.ThreadAbort
Wersja systemu operacyjnego: 6.1.7601.2.1.0.16.7
Identyfikator ustawień regionalnych: 1045
Dodatkowe informacje 1: f0d2
Dodatkowe informacje 2: f0d24c12a736bd99c1481e893c573f80
Dodatkowe informacje 3: 485d
Dodatkowe informacje 4: 485d211cccad671ade30e15ab97248d7
VRS 2.4.0.24745
-
agw
- Posts: 2249
- Joined: Fri Feb 17, 2012 3:20 am
Post
by agw » Mon Feb 13, 2017 2:41 am
Do you get any messages in the log around the time of the crash?
-
Chriso
- Posts: 46
- Joined: Sat Oct 13, 2012 9:46 pm
-
Contact:
Post
by Chriso » Mon Feb 13, 2017 8:53 pm
No, there is no message in the log file.
I think it is associated with a large number of connected receivers (they have about 150). When disabled some receivers, the frequency of popup error decreased.
-
Chriso
- Posts: 46
- Joined: Sat Oct 13, 2012 9:46 pm
-
Contact:
Post
by Chriso » Mon May 01, 2017 9:41 pm
Does anyone know how to make it do not crash VRS?
-
UA4WIY
- Posts: 65
- Joined: Mon Aug 29, 2016 7:41 pm
-
Contact:
Post
by UA4WIY » Sat May 20, 2017 6:17 am
I also had the same problem. Installed the latest preview version of VRS installed as a service. The problem is gone.