Something wrong with filter menu

Is Virtual Radar Server not behaving itself? If so then please report it here.
Post Reply
aeroradio
Posts: 7
Joined: Sat Mar 16, 2013 2:31 pm

Something wrong with filter menu

Post by aeroradio » Wed Mar 13, 2019 12:20 pm

Hi all,

I set up a filter from the Menu. I wanted to test merging ADSBexchange and my own local receiver. All worked OK, the filter I set up was to limit number of aircrafts received through the ADSBexchange channel.
So I set up a filter Distance in the range 0 to 300 nm. Filter is working and limitation is OK BUT... now, I don't receive aircrafts that are below a level, an altitude (around 12000 ft ???) and there is no altitude filter set up, of course.
If I untick the filter enable box, I can see all aircrafts. If I tick it, few of them disappear.
I try to find which altitude is concerned but no result. I even try to play with transition level but not change.
I tried the V3.0 Preview, the problem is still here.

EDIT : I found something new. The problem seems to appear with aircrafts that do not show their positions (it's not a matter of altitude as I thought before).

Is there any solution to this problem ?

Many thanks for helping.

Denis

Post Reply