Faulty flightaware dongle blue

Are you having trouble getting Virtual Radar Server installed and running? If so then this is the place to ask about it.
Post Reply
Andyk001
Posts: 1
Joined: Tue May 07, 2019 2:00 pm

Faulty flightaware dongle blue

Post by Andyk001 » Tue May 07, 2019 2:08 pm

Hi I recently purchase z flight aware dongle to feed bed on set up via dad if and dump 1090 it worked fine I have good reception. Having just come back from China where I used the dongle with 1090 and vrs, I booted everything up in the UK and received the following error message
A CONNECTION CANNOT BE MADE WITH THESE SETTINGS NO CONNECTION COULD BE MADE WITH THE TARGET MACHINE ACTIVELY REFUSED IT 127.0.01 3101.

Any help would be greatly appreciated to get back decoding
Regards

Andy

lesveldt
Posts: 21
Joined: Wed May 18, 2016 12:40 pm

Re: Faulty flightaware dongle blue

Post by lesveldt » Tue May 14, 2019 10:12 am

I think you have to look at the IP-address and the port.
And check if Dump1090 is running good.

Post Reply